Data IntegrationKnowledge center
Technical notes from the field
Articles from seven areas of expertise: configuration mistakes, field scenarios and solution steps in systems, networking, security and enterprise IT infrastructure.
Data Integration
Industrial EthernetIP Addressing and Device Naming Standards for Factory Networks
A factory network IP addressing standard: a subnet plan per line and cell, static/DHCP/DCP assignment, PROFINET device name rules, a naming template and an IPAM checklist.Industrial Networks / IT-OT · 3 November 2026 · 9 min readRead more
OT Security and SegmentationDesigning a Management Network and Out-of-Band Access for OT Network Devices
OT management network design: management VLAN and VRF, out-of-band network, console server, SSH and SNMPv3 hardening, placement of the management station and a Cisco IOS XE example.Industrial Networks / IT-OT · 2 November 2026 · 9 min readRead more
Data IntegrationMethods for Reading Data from Siemens S7 PLCs: PUT/GET, OPC UA and Others
To get data from a Siemens S7, first check the CPU model, firmware and supported access method. This guide compares OPC UA and other reading options in terms of permissions, connection capacity and PLC load.Industrial Networks / IT-OT · 23 October 2026 · 11 min readRead more
Industrial EthernetFiber Optics in the Factory: Field Conditions, Connectors and SFP Selection
Fiber optics in the factory: SFPs suited to temperature and vibration, field termination, IP67 connectors, bend radius, an example link budget calculation and acceptance test steps.Industrial Networks / IT-OT · 9 October 2026 · 9 min readRead more
OT Security and SegmentationSegmenting a Flat OT Network Cell by Cell: A Step-by-Step Migration Plan
OT network segmentation migration: traffic baseline, communication matrix, cell boundaries, rules in monitoring mode, wave plan, verification and rollback steps.Industrial Networks / IT-OT · 8 October 2026 · 10 min readRead more
Data IntegrationMES–ERP Integration with ISA-95: Data Flows Between Levels 3 and 4
Follow how a work order opened in the ERP reaches the MES and how the production confirmation is posted back. The same example also shows how duplicate messages affect stock and production records.Industrial Networks / IT-OT · 22 September 2026 · 11 min readRead more
Industrial EthernetMigrating from PROFIBUS to PROFINET: A Phased Plan and Using Couplers
PROFIBUS to PROFINET migration plan: line inventory, full/hybrid/gradual approaches, choosing proxies and couplers, GSD/GSDML management, downtime windows and rollback steps.Industrial Networks / IT-OT · 10 September 2026 · 10 min readRead more
OT Security and SegmentationWhen Is a Data Diode (Unidirectional Gateway) a Better Choice Than a Firewall?
How does a unidirectional gateway work; how are historian, OPC and syslog carried, how are patching and remote support solved, and when is it chosen over a firewall?Industrial Networks / IT-OT · 7 September 2026 · 10 min readRead more
Data IntegrationThe Right Data Sources for OEE Calculation and Collecting Downtime Reasons
Why does OEE exceed 100 percent or fail to match the shift report? Check planned time, the product's ideal cycle time, total count and good count on the same data set.Industrial Networks / IT-OT · 21 August 2026 · 10 min readRead more
Industrial EthernetWhat Is TSN? Time-Sensitive Networking Standards and Their Impact on the Factory
TSN is not a single feature. Assess whether a switch meets a project's real requirements by examining which functions provide time synchronisation, traffic scheduling and redundancy.Industrial Networks / IT-OT · 10 August 2026 · 10 min readRead more
OT Security and SegmentationA Separate Active Directory for OT: A Separate Forest or the IT Domain?
OT Active Directory options: joining the IT domain, a separate OT forest, local accounts; DC placement, DNS, time, GPO, the trust decision and migration steps on site.Industrial Networks / IT-OT · 5 August 2026 · 11 min readRead more