Cabling and Physical InfrastructureKnowledge center
Technical notes from the field
Articles from seven areas of expertise: configuration mistakes, field scenarios and solution steps in systems, networking, security and enterprise IT infrastructure.
Cabling and Physical Infrastructure
Wireless NetworksWi-Fi Roaming: How Do 802.11k, 802.11v and 802.11r Work?
Is a call that drops while walking caused by the access point transition? We explain what 802.11k, 802.11v and 802.11r do, the risk with older clients and how to test the transition.Network · 15 April 2026 · 10 min readRead more
Network Monitoring and MaintenanceSetting Up a Central Syslog Server for Network Devices and Log Retention
How do you collect network device logs on a single server? We walk step by step through severity levels, time synchronization, device settings, rsyslog and retention sizing.Network · 14 April 2026 · 9 min readRead more
WAN and InternetEnterprise BGP Multihoming: Two Carriers with Your Own AS and IP Block
How do you connect to two carriers with BGP? We cover the address and AS number process, route registry entries, settings that affect route selection and a filtered example.Network · 8 April 2026 · 11 min readRead more
Cabling and Physical InfrastructureFiber Optic Testing: Loss Budget Calculation, OLTS and OTDR Measurement
Compare the fiber line’s total loss with the acceptance limit. If the loss is high, use the OTDR trace to investigate where on the line the problem occurs: at a connection, a splice or along the cable.Network · 20 March 2026 · 10 min readRead more
Switching and SegmentationLACP and EtherChannel Configuration: A Link Aggregation Guide
How is link aggregation with LACP set up and verified? We cover the difference between LACP, PAgP and static mode, load balancing and matching with the server side.Network · 18 March 2026 · 9 min readRead more
Wireless NetworksHow to Set Channel Width and Transmit Power in Enterprise Wi-Fi
How do you choose channel width and transmit power in Wi-Fi? We explain the 2.4 and 5 GHz channel plan, the DFS decision, power balance and post-change measurement.Network · 16 March 2026 · 10 min readRead more
Network Monitoring and MaintenanceNetFlow, sFlow and IPFIX: Which Should You Choose for Traffic Analysis?
How do you choose between NetFlow, sFlow and IPFIX? We compare the difference between flow caching and packet sampling, accuracy, device load and collector sizing.Network · 12 March 2026 · 9 min readRead more
WAN and InternetMetro Ethernet Services: E-Line, E-LAN and Carrier Handoff
What is the difference between Metro Ethernet service types? We explain E-Line, E-LAN and E-Tree, VLAN and MTU settings at handoff, the effect of rate limiting on throughput and the acceptance test.Network · 9 March 2026 · 10 min readRead more
Cabling and Physical InfrastructureCable Certification Testing: Reading Wiremap, NEXT and Return Loss Reports
How do you read a cable certification report? We explain the difference between permanent link and channel, wiremap faults, NEXT and return loss, and how to interpret marginal passes.Network · 20 February 2026 · 11 min readRead more
Switching and SegmentationSTP, RSTP and MSTP: Loop Prevention Design in a Campus Network
How do you choose between STP, RSTP and MSTP? We explain root bridge placement, edge ports and protection features with Cisco IOS examples and a diagnostic order.Network · 17 February 2026 · 11 min readRead more
Wireless NetworksWi-Fi 6, 6E and Wi-Fi 7: Which Generation Should an Enterprise Network Choose?
In which environments do the differences between Wi-Fi 6, 6E and Wi-Fi 7 pay off? We cover the access point refresh decision through the client inventory, PoE budget and uplink checks.Network · 16 February 2026 · 11 min readRead more