Data IntegrationKnowledge center
Technical notes from the field
Articles from seven areas of expertise: configuration mistakes, field scenarios and solution steps in systems, networking, security and enterprise IT infrastructure.
Data Integration
Industrial EthernetIndustrial Wi-Fi for AGVs and AMRs: Roaming and Latency Design
Industrial Wi-Fi for AGVs and AMRs: roaming time, 802.11r/k/v, channel planning among shelving, SSID and QoS separation, and acceptance testing while moving along the route.Industrial Networks / IT-OT · 10 July 2026 · 11 min readRead more
OT Security and SegmentationChange Window Engineering in OT: Testing, Rollback and Approval
How an OT change is carried out on site: risk class, testing and pilot, PLC and switch backups, downtime plan, measurable rollback criteria and a go/no-go list.Industrial Networks / IT-OT · 6 July 2026 · 11 min readRead more
Data IntegrationChoosing an Edge Gateway: Protocol Drivers, Buffering and Management
Edge gateway selection: PLC drivers, store-and-forward capacity calculation, hardware, routing on dual network interfaces, remote management and a checklist.Industrial Networks / IT-OT · 22 June 2026 · 10 min readRead more
Industrial EthernetMigrating from Modbus RTU to Modbus TCP: Gateways, Unit ID and Timing
Migrating from Modbus RTU to Modbus TCP with a gateway: frame differences, gateway modes, Unit ID mapping, RS-485 timing calculation, exception codes and a checklist.Industrial Networks / IT-OT · 8 June 2026 · 11 min readRead more
OT Security and SegmentationConnecting Machine Builder Networks to the Factory: 1:1 NAT and IP Conflicts
Connecting OEM machines that arrive with the same IP plan to the factory network: 1:1 NAT, masquerade and routed options, protocol pitfalls, a mapping table and the specification.Industrial Networks / IT-OT · 5 June 2026 · 10 min readRead more
Data IntegrationUnified Namespace (UNS) Architecture: Topic Design with the ISA-95 Hierarchy
How a Unified Namespace is built in the field: the ISA-95 topic tree, naming rules, separating raw and contextualised data, broker scaling and limits.Industrial Networks / IT-OT · 21 May 2026 · 10 min readRead more
Industrial EthernetMulticast Traffic and IGMP Snooping Configuration in EtherNet/IP Networks
How is IGMP snooping configured for EtherNet/IP? Implicit/explicit CIP, RPI and pps load, querier placement, choosing unicast, an example bandwidth calculation and a switch checklist.Industrial Networks / IT-OT · 11 May 2026 · 10 min readRead more
OT Security and SegmentationIEC 62443-3-3 Security Levels: How to Determine SL-T, SL-C and SL-A
The difference between SL-T, SL-C and SL-A in IEC 62443-3-3, how to read the FR1–FR7 and SR/RE structure, setting the target level for a zone, an example gap analysis and compensating measures.Industrial Networks / IT-OT · 5 May 2026 · 10 min readRead more
Data IntegrationMQTT Sparkplug B: Topic Structure, Birth/Death Messages and State Management
MQTT Sparkplug B in the field: the spBv1.0 topic structure, NBIRTH/NDEATH, bdSeq and seq, aliases, the Primary Host Application, differences from plain MQTT and a commissioning checklist.Industrial Networks / IT-OT · 22 April 2026 · 10 min readRead more
Industrial EthernetPROFINET Fault Diagnosis: Error Counters, Topology and Packet Analysis
The order of checks for a PROFINET fault: the PLC's diagnostic buffer, switch error counters, LLDP topology comparison, Wireshark filters and a symptom–cause table.Industrial Networks / IT-OT · 13 April 2026 · 10 min readRead more
OT Security and SegmentationCell-Level Firewalls: Transparent Mode or Routed Mode?
Transparent and routed mode for a cell firewall: the effect on PROFINET DCP, LLDP and multicast, the gateway mistake, the fail-open/bypass decision and the commissioning order on site.Industrial Networks / IT-OT · 6 April 2026 · 11 min readRead more